GOT-641  Graphite Sheet with Tanged Metal        

Graphite Sheet with Tanged Metal


Description: GOT-641 Gasket sheet is rolling pressed or die-pressed by high pure expanded graphite sheet, and inner lined by metal truss plate. The normal inner lined material is 1.4301 (304), 1.4401 (316) stainless steel truss plate, with 0.1~0.127mm thickness, more than 98% graphite content, and 1.0 g/cm graphite layer density.

Product application:
Can be cut into gasket with kinds of shapes
Widely used in container, boiler, pipeline, pump, valve, and flange for petrochemical and mining, etc.

Service range:
Temperature: -200~850°C
Pressure: 500 Bar
PH Value: 0 - 14

Main Characteristics:
Under the temperature severe alternating conditions, it will not change obviously, and can long-term keep good compressibility and recovery, no aging, and does not become brittle.

Suitable medium:
Steam, mineral oil, transformer oil, hydraulic oil, fuel, water, and sea water, etc.

Normal dimension:
1000 x 1000 x 1.0; 1.5; 2.0; 3.0mm
1000 x 2000 x 1.0; 1.5; 2.0; 3.0mm
1500 x 1500 x1.0; 1.5; 2.0; 3.0mm
1500 x 2000 x1.0; 1.5 ; 2.0 ; 3.0mm

copyright © 2009 Ningbo Gaote Sealing Co., LTD. All rights reserved
Powered by Speed network